Applications
For the mounting of pressure measuring instruments, stopcocks, shut-off valves, syphons, snubbers and other accessory components
Types of connection adapters
Male-female connection adapters
are used where one of the parts to be connected has a male and the other a female thread.
Female-female connection adapters
are used where both parts to be connected have male threads.
Male-male connection adapters
are used where both parts to be connected have female threads.
Self-sealing connecting nipples (SS)
are used to adapt a smaller size threaded connection to a larger one (e.g. G ¼ to G ½). Due to their design, the connecting nipples are self-sealing (i.e. the taper turned into the nipple presses into the bore of the pressure measuring instrument’s connection shank. To protect against inadvertent release of the two threaded parts, they are secured with a special adhesive.
LH-RH unions
per DIN 16283 have a right-hand thread (RH) on one side, and a left-hand thread (LH) on the other, which allow the parts to be sealed and orientated into any direction required.
Union nuts with nipple
per DIN 16284 enable mounting without having to change the orientation of the parts to be connected against each other.
Solderless compression fittings with compression ring
are used to connect pressure measuring instruments or fittings with pipelines from copper, steel and stainless steel. Particularly useful mounting, no solder or weld points. A sealing washer is included in delivery
